Welcome to Fish Farm Supply Co!
This oil free vane compressor can be powered by an electric motor (as shown) or by belts and pulleys. The vane life is 9 to 18 months, depending on rpm and pressure. The shaft is 7/8” diameter, 41/2” H and rotates counterclockwise (facing shaft).Operating range is 800 to 1,800 rpm. Motor horsepower depends on rpm and pressure. All v...
This is an excellent American made, oilless, 12 V compressor. This very popular compressor is great for mobile use, emergencies and even solar power applications. They are specially designed for aquaculture, providing high volume at low pressure (10 psi max). It features ball bearing construction and low amp draw with replaceable diaphragms and ...
These are very basic, compact, hard working, low cost 12 volt air pumps. Good for transporting fish, these come with 12" pigtails for use with batteries. Designed to work without an inlet air filter. ⅜" outlet hose included.
Not recommended for salt water applications. Three month warranty.
Unlike the standard silica airstones, these can be cleaned time and time again without wearing down. These airstones are made of aluminum oxide, the same material used for grinding stones which makes them extremely durable. With increased durability, there has been nothing sacrificed in the quality of aeration delivered to your pond,...
FlexAir™ disc diffuser bodies are made of high strength polypropylene with ¾” MNPT connections. Each diffuser has a minimum of 6,600 engineered air release orifices, which is up to 20 percent more than comparable models. The special design of the EPDM membrane, with its engineered thickness taper, results in full utilization of the m...
These flexible aquarium air diffusers produce a small curtain of air bubbles. Diffusers are rubber porous tubing with a flexible lead weight insert to counteract buoyancy. Five millimeter air supply connection. They can be bent and remain in almost any shape.
Windmills help to provide aeration to your pond while adding an appealing look to your property, and all without using any costly electricity. The American Eagles are made of durable galvanized steel and the compressor box is powder coated for extra protection. The American Eagle has an old style appearance with a new use but fits into the lands...
This 1/3 hp diaphragm compressor is completely oilfree and built for continuous operation. Ideal for deeper applications, it produces 1.5 cfm at 10 psi and will pump to a maximum depth of 30’. It requires no scheduled maintenance (except for cleaning the air filter and air stone) and is equipped with thermal overload protection, an integrated ch...
Self weighted Bio-Weave diffuser hose is a popular method of introducing air and oxygen into hauling tanks, culture tanks, lakes or wherever long flexible diffusion is needed. It is made of a strong, woven Dacron® material that will last for years. Operating range is 0.2 to 0.6 cfm per foot. The diffuser surface is a soft fiber that flexes easil...
These unique round air diffusers come in three sizes, each only 1” high with a 3/16” aquarium airline connection on the side. Perfect for aquarium use. Silica diffuser in a plastic frame.
Note: These units do require additional weight to keep them at the bottom.
These cabinets are an alternative to our other cabinets. The post mounted cabinet has a flip down lid that allows full front and top access to the contents of the cabinet. The post mounted unit has space for 3 air lines to exit the cabinet. Base mounted cabinet has a flip up sloped lid that is 16” high at the back hinges and slopes ...
This is a link to our current downloadable catalogue.
*** PLEASE MAKE SURE TO INCLUDE MAILING ADDRESS WITH ORDER ***
We are currently working on a new catalogue. Please contact us by (877) 669 -1096 or firstname.lastname@example.org, if you would like to receive a new catalogue when they are available.
These diffusers are made from fused alumina. They produce a bubble size of 1.0 to 2.0 mm and require a higher pressure than a medium pore diffusers. They have a molded square rubber support on each end that supports and protects them from tank bottoms and protects the tank or liner from the diffuser. They fit both 3/16” and 1/4” tubing and are 1...
To protect diffusers from abrasives like concrete or to protect a tank from abrasive diffusers. Use two diffuser bumpers for each diffuser. These oversized, heavy duty O-rings are made of Buna 70 for easy stretch over 11/2” square diffusers. Sold in packs of 10. Diffuser not included.
Keep any system aerated with this line of air diffusers. These offer great efficiency at an affordable price, and with our wide selection, you’ll find the right fit for any application. Bubble sizes from 3 mm down to 100 microns. Quad packages are 4 diffusers and a connector block, with a 1/4” barb inlet. Shipped disassembled. Dimen...
Continuous aeration benefits your pond in a number of ways: It can reduce or eliminate the need for emergency aeration and water exchange; it can reduce the buildup of ammonia, blue green algae and muck; and it helps to keep oxygen near the bottom, where it can keep benthic organisms alive. FAT CAT™ a series of small diffusers attach...
EDI FlexAir™ T-Series fine bubble diffusers feature:• Non-buoyant tube design for maximum stability.• Airflow ranges from 0 to 40 cfm.• Largest capacity airflow with greatest membrane area means fewer units.• 3/4” MNPT 304 SS thread connection.
EDI FlexAir™ diffusers are durable. The special inlet is molded from high strength ABS and is permanen...
Manifolds are constructed from stainless steel and use our popular Lexan oxygen flow meters. They are easily mounted to hauling tanks or trucks and can be connected to form larger configurations. Manifolds are fully assembled, leak tested and include inlet/outlet barb fittings. Available in three flow ranges 0.125 to 3.5 lpm, 0.25 to 8.0, 0.5 t...
Perfect for high pressure or oxygen uses. This low pressure, high efficiency rubber diffuser hose is made for hydroponics. Diffuser lengths of up to 20’ per inlet are possible at low airflow rates. Tubing has a good oxygen transfer rate (average 2.5% per foot of water depth) with a head loss of only about 1 psi. This tubing is compatible with bo...
These air pumps move large volumes of air and are suitable to aerate large koi ponds, bait tanks, small aquaponic tanks or systems up to 8 ft deep. **If air stones are more than 8 ft deep there will be undue wear on the diaphragms and will void the warranty.
Aluminum covers and internal noise absorbing systems make these linear pumps...
Kasco circulators are perfect for creating directional flow in your pond or lake year-round. Creating this flow will turn your still water into a stream environment and help to add vital oxygen.
Still, stagnant water is an ideal breeding ground for unwanted vegetation, as well as mosquitoes. Creating the stream environment will help...
Kasco de-icers can be used to help prevent winter kill conditions and protect marine equipment, such as docks & boat houses, from ice damage. These are popular among cottage owners, marinas, and pond owners alike.
During harsh winters with thick ice and heavy snow pack, your pond can experience a fish die off due to low oxygen le...
C10 - portable thermostat
C20 - Thermostat Controller
Universal Dock Mount
Horizontal float - turns a deicer into a circulator
Multiple Fountain Patterns for the Price of One!
Kasco Marine’s JF series floating aerating fountain is great for larger ponds or when multiple large patterns are desirable. The JF series fountain is unique for its size, in that it comes standard with interchangeable nozzles to give you multiple fountain pattern options while only p...