Welcome to Fish Farm Supply Co!
These air pumps are a powerful and reliable option for ponds, tanks and aquaponic beds up to 4 ft deep. **If air stones are more than 4' deep there will be undue wear on the diaphragms and will void the warranty.
Aluminum covers and internal noise absorbing systems make these linear pumps surprisingly quiet and rugged. The pump housi...
These air pumps move large volumes of air and are suitable to aerate large koi ponds, bait tanks, small aquaponic tanks or systems up to 8 ft deep. **If air stones are more than 8 ft deep there will be undue wear on the diaphragms and will void the warranty.
Aluminum covers and internal noise absorbing systems make these linear pumps...
Unlike the standard silica air stones, these can be cleaned time and time again without wearing down. These air stones are made of aluminum oxide, the same material used for grinding stones which makes them extremely durable. With increased durability, there has been nothing sacrificed in the quality of aeration delivered to your pon...
Weighted tubing is self-weighted so it lays on the bottom of your pond instead of across the top of the water like polyethylene or vinyl airline.
No more bricks or cinder blocks to try to hold your tubing down! This means easier installation, removal, and maintenance.
Tubing lays across the bottom so you're much less likely to get s...
These durable meters have a chrome plated brass base, a precision flow adjusting valve and a Lexan® high impact hood. The MFR615 is a favorite for hauling tanks equipped for pure oxygen. Connections are ⅛” NPT female pipe thread on the side inlet and a 9/16” 18 male DISS bottom outlet. Price includes ¼” barbed brass inlet and outlet adapter fitt...
These are very basic, compact, hard working, low cost 12 volt air pumps. Good for transporting fish, these come with 12" pigtails for use with batteries. Designed to work without an inlet air filter. ⅜" outlet hose included.
Not recommended for salt water applications. Three month warranty.
These high quality, resin bonded, ceramic plate diffusers are recommended where pure gas, including oxygen and carbon dioxide, is to be used. They produce a cloud of ultra fine bubbles, 100 to 500 microns in size, for excellent gas transfer. 50% oxygen transfer at a depth of 4’ is typical! Since these diffusers lay flat bubbles do no...
FlexAir™ disc diffuser bodies are made of high strength polypropylene with ¾” MNPT connections. Each diffuser has a minimum of 6,600 engineered air release orifices, which is up to 20 percent more than comparable models. The special design of the EPDM membrane, with its engineered thickness taper, results in full utilization of the m...
These inexpensive molded diffusers are sold in bulk quantity only, by the pack. 3/16“ barb inlets. Made for hobbyists and aquarium use.
These unique round air diffusers come in three sizes, each only 1” high with a 3/16” aquarium airline connection on the side. Perfect for aquarium use. Silica diffuser in a plastic frame.
Note: These units do require additional weight to keep them at the bottom.
This is a link to our current downloadable catalogue.
We are currently working on a new catalogue. Please contact us by (877) 669-1096 or email@example.com, if you would like to receive a new catalogue when they are available.
Sweetwater® regenerative blowers are manufactured to meet the need of the aquaculture industry. Sweetwater® blowers reach higher pressures, operate in more corrosive environments and operate at lower noise levels than industry standard commercial blowers. Regenerative blowers provide large volumes of air at lower pressures that are r...
These airstones are housed in a plastic body to help protect the airstone and give a cleaner look. These airstones work well at low pressures and are ideal for backyard and koi ponds. As they also blend in will to your pond as the black body matches most lined and moulded ponds. The medium pore in these airstone maximizes low maintenance and hig...
With an air resistance of less than 0.25 psi, these glass bonded diffusers are compatible with economical low pressure applications, such as blowers. These diffusers are machined from a solid block of glass bonded silica. Because dust and dirt particles up to 30 microns in size will pass right through these diffusers, there’s no need...
A single stage, medium duty regulator rated at 0 to 100 psi with 540 CGA connections. Use where slight pressure changes will not affect the job.
Quiet operation. Magnetic drive. Energy efficient. External or submersible. Small footprint, high flow rate. Need a quiet water pump for your aquarium or research system? Quiet One® pumps have a noise level less than 45 decibels and can be used in either above water or submersible applications. A patented uni-directional impeller wit...
Sweetwater, oil free rotary vane compressors are compact, easy to service, and excellent for moderate pressure, continuous duty applications. They move more than double the air of piston compressors and with extended longevity.
Sacrificial oil-free carbon vanes automatically adjust to maintain compressor efficiency as they wear. Van...
Sacrificial oil-free carbon vanes automatically adjust to maintain compressor efficiency as they wear. Vanes need to be replaced occasionally, which requires common household tools. Vane life expectancy is 12 to 36 months depending on operating pressure.
Repair kits include a full set of carbon vanes (4), replacement instructions...
This black tubing is ideal for air lines or water lines, and is used with all of our aeration kits.
This polyethylene is UV balanced, and so it will not become brittle due to sunlight exposure. This line is flexible enough to be easy to work with but rigid enough to prevent collapsing if buried.
This is an affordable way to run airl...
Single braid construction hose for conveying pure oxygen up to 200 psi. This ¼" air line is sold per foot or in a 700' roll to customize your system. The hose does not include any ends or fittings. Green in colour.
These normal wear-and-tear replacement parts are for the Large Linear Aeration Kits, HAP-60 and HAP-120.
These normal wear-and-tear replacement parts are for the Linear Aeration Kits, the 9720 and 9730 compressors.
C10 - portable thermostat
C20 - Thermostat Controller
Universal Dock Mount
Horizontal float - turns a deicer into a circulator
Kasco de-icers can be used to help prevent winter kill conditions and protect marine equipment, such as docks & boat houses, from ice damage. These are popular among cottage owners, marinas, and pond owners alike.
During harsh winters with thick ice and heavy snow pack, your pond can experience a fish die off due to low oxygen le...
Kasco circulators are perfect for creating directional flow in your pond or lake year-round. Creating this flow will turn your still water into a stream environment and help to add vital oxygen.
Still, stagnant water is an ideal breeding ground for unwanted vegetation, as well as mosquitoes. Creating the stream environment will help...