116 Bonnie Cres, Elmira, ON N3B 3J8
Welcome to Fish Farm Supply Co!
This is a link to our current downloadable catalogue.
*** PLEASE MAKE SURE TO INCLUDE MAILING ADDRESS WITH ORDER ***
We are currently working on a new general catalogue. Please contact us by (877) 669 -1096 or email@example.com, if you would like to receive a new catalogue when they are availabl...
Developed specifically for the aquaculture market, this meter is waterproof and includes a galvanic probe with 4, 10 or 15 meter cable. Features automatic temperature compensation, backlit display plus salinity and altitude manual compensation. Includes: probe, cable, spare membrane, solution, shockproof rubber boot and battery. Unit automatic...
A complete outfit for pond fish culture, ideal for fresh water analysis. Nine critical test factors can be efficiently and accurately determined on site.Designed with field analysis as a priority; all reagents, components and accessories are arranged in pre-drilled ethafoam. Short form instructions are provided in a handy lid label for easy acce...
Here’s a low cost, automatic, temperature compensated salinity refractometer, similar to our high quality model, but not as durable or as finely graduated. It has automatic temperature correction from 50 to 86°F (10 to 30°C) and a dual scale reading 0 to 100 ppt and 1.000 to 1.070 specific gravity. Each refractometer is tested to ensure an accur...
These easy to use pH pens from Hanna Industries are waterproof and will float. They feature automatic shut off, temperature compensation, replaceable electrodes, hold function, stability indicator and temperature readings in either °C or °F . Choose pen with sensitivity in tenths (98127) or hundredths (98128). Pens weigh only 3 oz, measure 7” l ...
This ABS plastic thermometer is ideal for use in garden ponds and fish tanks. It reads in both oF and oC (30 to 110oF, 0 to 40oC), has a shatterproof magnifying lens and features a snap on/off cap that allows it to float or sink. Three foot cord is included. Measures 8” (20 cm) long x 11/4 ” (3.2 cm) dia.
This pH controller utilizes a microprocessor to monitor and control pH levels in aquatic systems. Unlike other controllers, this one has two independent 5 amp relay systems. One relay will turn a device on if the pH goes below a preset point. The other activates if the pH goes above a preset point. Controllers feature easy calibration, turn scre...
This meter has a rugged combination, flat surface pH electrode (with auto ranging), high accuracy conductivity cell. RENEW feature alerts users when the electrode needs replacing. Adjustable conductivity to TDS ratio from 0.4 to 1.0 and 0.5 fixed salinity ratio. Meter also has automatic temperature compensation, auto shut off and low battery ind...
Largest and sharpest scale display available. Calibration ring for simplified calibration. This refractometer features a magnified scale for better visual accuracy. Other features include solid aluminum construction, a rubber gripped body and temperature compensation between 10 and 30°C (50 to 86°F). To calibrate, simply loosen the handset screw...
This is a simple, inexpensive pocket pH tester.The pHep® family features a casing that is rugged and enhanced to fit your hand. The design of these testers also features a larger LCD so measurements are easier to read. Each instrument in the pHep® family comes with a protective cap that can be used as a measurement vessel. With the latest innova...
For measuring both low and high salinity levels in ponds, recirculating systems, brackish waters, etc. Testing takes 5 minutes. 0 to 20 ppt (parts per thousand) in 0.4 increments.
he NEW OxyGuard Handy Polaris 2 is a portable Dissolved Oxygen (D.O.) meter, which combines the features of the original Polaris with the convenience of data logging and data transfer capability. The OxyGaurd Polaris2 can reduce labour for recording and tracking data in your system by storing it for you. The data logger will store over 3000 sets...
This is an intermediate compound formed in the oxidation (nitrification) process of ammonia becoming nitrate. Nitrite can become toxic in recirculating systems. Nitrites interfere with the ability of the fish’s blood to take up oxygen (levels as low as 0.2 mg/l can cause “Brown Blood” problems with catfish). Testing takes 5 minutes. There are 50...
For measuring for the presence of hydrogen peroxide. Test takes 3 minutes. Range: 0 to 40 ppm (parts per million) in increments.
The total hardness of water generally represents the total concentration of dissolved calcium and magnesium ions. Although closely related to alkalinity and the buffering capacity of water, high alkalinity may not always indicate high hardness. Hard waters (above 150 mg/l) are generally more productive for fish than soft waters. The typical rang...
Carbon dioxide (CO2) is present in water as a dissolved gas, like oxygen. High CO2 can stress and even kill fish. It also forms carbonic acid, which lowers the pH. Testing takes 2 minutes. 0 to 50 mg/liter. There are 50 tests per kit.
This kit provides equipment to monitor nine parameters most critical for the saltwater fish care. Reagents, labware, and accessories are mounted in ethafoam for convenient test selection and portability. Short form lid label instructions are always available for quick reference, and a long form booklet provides detailed instructions ...
Highly recommended for the serious field professional, this kit includes most things a fish farmer needs to monitor water quality. The portable lab analyzes the 8 critical factors most commonly required by a fish farmer: dissolved oxygen, pH, temperature, salinity, nitrite, ammonia, hardness and alkalinity. Excellent for both fresh and saltwater...
Suitable for fresh and saltwater aquariums.
Master Kit Includes 10 test parameters for: Phosphate, Calcium, Nitrate, Nitrite, Ammonia, pH High Range, pH Low Range, Carbonate Hardness, General Hardness, Iron.
Provided in a durable plastic case for extended service life and reagent protection.
Kit also includes: 5 glass test tubes with...
Ammonia Alert is an innovative colour device designed for continuously detecting and monitoring toxic “free” ammonia. The internal sensor changes colour reversibly from yellow to green to blue, relative to the ammoniaconcentration. The device detects less than 0.05 mg/l “free” ammonia and lasts over one year. Put one in every aquarium and tank.
These small test strips provide a rapid means of checking water quality. Simply dip a strip into the sample, wait for colour to develop, and compare colour on the reagent pad to the colour chart on the bottle. Each kit contains 50 tests, except Nitrate & Nitrite and Ammonia have only 25.
Range and Saltwater Compatibility
This is an economical, non-contact, infrared thermometer that is only 11/2” wide by 21/2” high and measures surface temperatures of any liquid, solid or semisolid in less than one second. Minimum and maximum readings are stored in the internal memory, hold function freezes reading for 7 seconds. Reads in oF or oC selectable display. Range: -30 t...
Test strips are ideal for salespeople wanting to simplify a demonstration or for service technicians and consumers who want a quick look at the basic water quality profile of a water treatment system or water supply. Chlorine, wide range pH, Hydrogen peroxide and iodine strips include a colour chart and come in a waterproof vial. QAC (quaternary...
Each vial of test strips features a leak proof, hinged, pop top lid and a wrap around desiccant liner to protect strips from moisture intrusion. The multistrips have 5 different tests (alkalinity, pH, nitrite, nitrate and hardness) on one strip. Test strips are both fresh and saltwater compatible, 25 tests per kit.
Read temperature instantly from a distance! It is easy to measure pipes, walls, motors, vents, ceiling insulation, etc., up to 930°F. Simply point them at any surface and read the temperature. You will find these extremely useful for finding insulation leaks and motor temperatures. This model features a built in laser that guides you right to th...
Pinpoint® Calibration Thermometer, the only truly accurate and affordable digital thermometer system with a large range calibration feature and a replaceable probe. The Pinpoint® Calibration Thermometer features a lab grade waterproof 10-foot thermistor fiber with a triple minijack connection. A standard pair of AAA batteries will power the inst...
The large display Temp AlertTM features an adjustable audible alarm for high and low temperatures and larger digits on a 4” x 4” x 1” meter. Accuracy of 0.5 degree. The alarm will activate for both water and room temperature settings. Submersible probe with 3’ cable, suction cup and AAA battery included. Weighs 4 oz.
This accurate yet economical thermometer is made with nontoxic red alcohol (no mercury) on white background. The range is 0 to 230oF and -20 to 110oC. Requires minimum immersion depth of 3”. Overall length is 12”.
A simple way of knowing the high and low temperatures in a building, cooler, outside, etc. Easily reset with the push of a button. Accuracy 1%. Length is 8”. Dual scales of -50 to 50oC and -60 to 120oF. Mercury fluid.
This shirt pocket thermometer is filled with non-toxic red alcohol. Measures both oC and oF, range -40 to 70°C and -40 to 158oF. Comes with a plastic or an aluminum protective case.
Copper as copper sulfate is often used in fish culture as an algaecide, but it can be lethal to fish even at low levels, especially with low pH and alkalinity levels. It can be very toxic to juvenile clams and other invertebrates, particularly saltwater species. Testing takes one minute.There are 50 tests per kit. Range: 0.05 to 1.0 mg/liter.
This kit provides an inexpensive alternative to a dissolved oxygen meter. Testing takes 5 minutes. There are 50 tests per kit. Range: 0 to 10 mg/liter. Note: These tests may not give accurate results when used with ammonia reducing chemicals.
This is the final nitrogen product formed by bacterial oxidation of ammonia. Although it is not usually considered a threat to freshwater fish, it is a plant nutrient and can harm marine invertebrates.Testing takes 12 minutes. There are 50 tests per kit. Range: 1 to 15 mg/litre.
This is a measure of hydrogen ion concentration, or more simply, whether the solution is acidic or basic. Units 0 to 6.9 are referred to as acidic. Units 7.1 to 14 are considered basic and pH 7.0 is neutral. Test takes 2 minutes. There are 50 tests per kit. Range: 5.0 to 10.0.
Phosphates enter water supplies from wastewater treatment, sewage, soil runoff, fish foods, etc. Although necessary for biological processes, too much phosphate may cause excessive growth of algae and plants. Testing takes 2 minutes. Range: 0.5 to 100 ppm.
To know how toxic ammonia is to your fish, you must know the ammonia level, the pH level and the temperature. A total ammonia level of 10 mg/l may not be harmful to trout at a pH of 6.0, but it would be deadly if the pH were 7.0. The test kits measure total ammonia. Total ammonia consists of both non-toxic NH4 + (ionized) and toxic NH3 (unioni...
The OxyGuard Polaris is a portable Dissolved Oxygen (D.O.) meter. It measures percent saturation, mg/l (ppm) and temperature. Measurements are compensated for temperature, salinity and barometric pressure. The probe is fully field serviceable. The meter is powered by a 9 V battery.The Polaris has a larger display with backlight and o...