Fish Farm Supply Co Inc.116 Bonnie Cres, Elmira, ON N3B 3J8
Welcome to Fish Farm Supply Co!
This is a link to our current downloadable catalogue.
*** PLEASE MAKE SURE TO INCLUDE MAILING ADDRESS WITH ORDER ***
We are currently working on a new general catalogue. Please contact us by (877) 669 -1096 or email@example.com, if you would like to receive a new catalogue when they are availabl...
Low maintenance. Energy efficient. These robust, epoxy sealed, low head, magnetic drive pumps can be used either inline (above water) or submersed! Designed for fresh and saltwater. The outlet can be rotated to different positions for vertical or horizontal discharge. A foam prefilter is included with all pumps. A 10’ power cord is s...
Quiet operation. Magnetic drive. Energy efficient. External or submersible. Small footprint, high flow rate. Need a quiet water pump for your aquarium or research system? Quiet One® pumps have a noise level less than 45 decibels and can be used in either above water or submersible applications. A patented uni-directional impeller wit...
Submersible pump intake screens are typically quite small and can be blocked with just a little debris. While looking for a solution, we realized that we could put the pump into a filter bag. We carry five different sizes. Place your submersible pump, its power cord and outlet hose right in the bag, tie the top closed, and you have a...
These oil free pumps have been designed to be flexible so that no matter your set up they will work for you. Pumps can be set up horizontally or vertically and can be run submersed or with flooded suction. They have molded MNPT inlet and outlet, a clip-on intakescreen, 20’ cord and a handle for easy install and removal. The included pre-filter m...
Low head. These pumps are oil free and use a water cooled, energy efficient motor, providing you with the large flow needed to supply waterfalls. Underwater use only. All pumps can used vertically or horizontally.115 V, 60 Hz with 16’ power cords. UL listed. Two year warranty.
Gallons Per Hour...
10 Amps @ 115V
1-1/2” FPT Inlet x 1” MPT Outlet
These energy-efficient March Pumps offer the ultimate in reliable, trouble-free performance. They feature built-in thermal overload protection, TEFC motors, dry-run capability and are UL-listed. Materials in contact with solution: polypropylene, ceramic, Viton. Pumps are single phase, and include 6...
1.6 Amps 115V
13' Head Max
2.0 Amps 115V
27' Head Max
1.5 Amps 115V
22' Head Max
15 Max Operating Amps
Turn pump on when float drops
This clamp on flow meter is simple to install. Just drill an 11/16” hole in a horizontal section of pipe and clamp it on with the two stainless steel clamps provided. Easily disassembled for cleaning. May be used with saltwater, but the float (replaceable) will corrode. Maximum temperature 120°F. Maximum pressure 120 psi. Dual scale, gpm and lpm...
Parts for Danner Mag Drive Pumps.
250 gph (4.2 gpm)
350 gph (5.8 gpm)
500 gph (8.3 gpm)
700 gph (11.7 gpm)
950 gph (15.8 gpm)
1200 gph (20 gpm)
1800 gph (30 gpm)
Pondmaster Pro’s Hy-Drive® pump uses the best of mag drive and direct drive technology to quietly and efficiently supply up to 80 gpm. Ideal for ponds and multi tank aquariums. Oilless design ensures your fish are safe. Submersible in-line pump includes extra large inlet screen and 11/2” hose barb adapters. 11/2” FNPT inlet and 11/2” MNPT outlet...
Medium head. These top discharge pumps are built for long life and high performance. PLB2400 uses only 6.2 amps! The highly efficient PLB2400 has a special urethane rubber impeller, aluminum motor frame and synthetic rubber casing, suction cover and wear ring. The PLB2750 has a galvanized steel housing and a cast iron impeller. Outlets are 2” MN...
Super corrosion resistance!Designed specifically for continuous duty in salt water, these high quality,Japanese-made, very efficient pumps will provide a long service life.All parts in contact with water are either titanium or FRP resin, including the motor shaft and the screws! Model 4TM is 115V/60 Hz, single-phase. Model 8TMT is 230/460V, thre...
The safety aspect of 12 V DC power should not be overlooked. These 12 V pumps have brush type motors that will typically run for 2,000 hours or more, making them suitable and reliable for many temporary applications. Rule® pumps feature snap off strainers for easy cleaning; double insulated, water cooled motors for longer life; Teflo...
Medium head. The new L3-PLUS SERIES™ engineered using best-in-class technology. The proprietary impeller design delivers a higher level of precision concentricity for increased efficiency. The proprietary hydraulic isolator smooths the water flow inside the volute, raising the efficiency even higher. A rugged plastic construction delivers durabl...
High head. Offering extremely high water flow in a quiet, energy efficient package with durable construction, the Sparus™ pumps are effective in commercial aquaculture applications. Available in a wide range of horsepower and voltage ratings, the innovative hydraulic designof the Sparus™ pumps move water more efficiently and more quietly than co...